Line for preparation of complete feed for dogs and cats with capacity of 200 kg / h *. Provides ability to produce extruded feed which are purified of harmful microorganisms.
*Line supply capacity 600 kg/чh
Line of up to 200 kg/h capacity
Line components:
1. Combi-feed mixture preparation device
2. Hopper for storing mixtures №1, №2 (2 units)
3. Conveyors from hopper to extruder (2 units)
4. Extruder + Steam generator
5. Conveyor from extruder to dryer
6. Thermotunnel 2 units
7. Conveyor from dryer to grinder
8. Tunnel grinder with possibility to apply aromas and oil
9. Conveyor from dryer to automat
10. Automatic bagging on 5-10-20 kg
Technical characteristics:
Power consumption: 92 kW;
Required area: 80 square meters;
Servicing staff: 5 people.
Extruder operation principle:
Before extruding the raw material is mixed and conditioned in a mixer pre-conditioner. An important step of technology process is conditioning, in which the mixture is moistened and heated by hot dry steam under the pressure of 0.2-0.5 MPa and a temperature of 110-130 ° C, after which the mixture softens and becomes more pliable, which contributes to the better extrusion, less wear of consumables parts of extruder, increase of productivity and improvement the shape of the granules. After mixing and conditioning the raw material is fed into the hopper of extruder where it is fed to the working body by the feeder. The hopper of the extruder provides an opportunity to put different additives into the raw material.
During the process of extruding on this equipment the product comes through the following stages: heat treatment, dehumidification, sterilization, and texturing granulation.
Being in the working body of the extruder the raw material is subjected to the steam heat exposure duration of 4-6 seconds and then is subjected to a pressure of 30 atmospheres. The short duration of the process (no more than 6 seconds) allows you to save the contents of protein and does not reduce the availability of lysine. At the moment of combi-feed releases from the expander it is as if an explosion of the product, due to a quick reduction of pressure, the following changes occur: bonds are broken at the cellular level, changes in the structure of starch, carbohydrates are becoming more exposed by the action of digestive enzymes.
Also, after the extrusion the palatability and digestibility of feed improves, as the result the weight gain of animals raises, feed costs reduce, loss of cubs reduces due to the reduction of bacteria in the grain. The feed pellets produced on this extruder also does not raise dust and does not not collapse during transportation.
Advantages of the line:
• The line can produce food from natural ingredients
• Large surface of particles and a porous structure that provides easier penetration of the gastric juice and its own enzymes in feed.
• Grit unlike the granulators is not so hard, so doesn’t injure the esophagus and stomach of animals;
• Coarse-grained, so does not form dust and thus doesn’t causes sticking on the digestive and breath ;organs
• Resistance of granules to attrition.
• Stability and sustainability in transport.
• Higher hygiene of comni-feeds.
• The use of low-value wastes for cooking enriched feed.
• nutrients, minerals and vitamins content in received feed corresponds to the best world standards
• extrusion processing can improve the digestibility obtained in the line feed by 30%
The completion of line can be changed according to the buyer’s wish.
Warranty:
12 months from the date of commissioning works on the territory of the buyer, but not more than 18 months from the date of dispatch of equipment to the customer.
