Filling and packaging machine is equipped with a weight batcher and is designed for filling in bags by high doses of non-dusting product having a good flowability, such as feed, fuel granules, washing powder, sand, pellets, sugar, grain, salt, soil, pebbles, gravel, fillers for animals and so on.
The machine is equipped with combined (pneumatic and mechanical) drive. It works in automatic mode, the performance of 10 packages / min.
The machine is installed on the floor, the length of the film used for packing is limited. In order to measure the box sizes, the packing machine can be equipped additionally with the replaceable device for forming packs (tube-collar).
Specifications:
| Power supply | |
| Voltage supply, V | 380 |
| Supply current frequency, Hz | 50 |
| Power consumption, kW/h | 2.5 |
| Power of pneumatic drives | |
| Air pressure in line (average), atm. | 6 |
| Airconsumptionattheaveragepressure, l./min. | 100 |
| Overall dimensions and weight | |
| Length (max), mm | 5500 |
| width (max), mm | 1500 |
| height (max), mm | 4500 |
| weight (max), kg | 650 |
| Sizes and thickness of packing material | |
| Thickness of packing material (allowable), microns | 20-150 |
| Width of the roll (max), mm | 1250 |
| External diameter of the roll (max), mm | 500 |
| Working characteristics | |
| Volume for the hopper for packaged product, l | 140 |
| Dosing limits (dose weight), g | 5000-50000 |
| Dosage error (allowable), % | 2 |
| Dosingspeed (max), doses/min: * | 10 |
| Welding (soldering), packingtime(includingcooling), sec. | 3-5 |
| Heating of welding unit (welding method) | Continuous |
| Length of packing (max), mm | 900 |
| Packing width (max), mm | 500 |
| Adjustable parameters | |
| Dose weight (range), g | 5000-50000 |
| Heatingtemperatureoftheweldingunit(range), g. Celsius | 80-200 |
| Weldingcycletime (welding unit in compressed state), sec. | 0-5 |
| Contacttimeoftheweldingelementwithpackingfilm, sec. | 0-5 |
* dosing speed of the packing machine depends on the type ofpackaged product, its flowability, density, moisture content, dose size and properties of packaging material.
To insure the functionality of pneumatic drives of this packing and filling equipment it is necessary to have compressor (is supplied separately).ﾂ
