Filling and packaging machine is used for continuous process of packaging by volumetric dosing method of dusty flowable products (starch, chalk, cement, flour, etc.) and packaging into the polymer films.
The automatic packing machine includes packaging device and screw batcher. In automatic mode it performs up to 25 packsﾂ / min.
Machine aims to change spontaneously the dose size of packaged products. However, it is also worth considering that the machine measures the bulk product by the number of the screw turnovers. Thus, by changing the dosage of products, the weight of portions at the same number of turnovers for the different products is different and in this case it is necessary to take into account its density.
There are some limitations in working with this machine: the floor location of the machine is necessary because of the large dimensions and limitations by the height and width of the film (shown in the specifications of the machine) It is also possible to produce the large size machine: maximum film width - up to 500 mm and the height of package 窶砥p to 400 mm.
Specifications:
| Power supply | |
| Voltage supply, V | 380 |
| Supply current frequency, Hz | 50 |
| Power consumption, kW/h | 2.5 |
| Power of pneumatic drives | |
| Airpressureinline (average), atm. | 6 |
| Airconsumptionataveragepressure, l./min. | 100 |
| Overalldimensionsandweight | |
| Length (max), mm | 2000 |
| width (max), mm | 1500 |
| height (max), mm | 3000 |
| weight (max), kg | 360 |
| Sizes and thickness of packing material | |
| Thickness of packing material (allowable), microns | 20-60 |
| Width of the roll (max), mm | 380 |
| External diameter of the roll (max), mm | 300 |
| Working characteristics | |
| Volume of the hopper for raw material, l | 60 |
| Dosing limits (nominal volume of the ﾂｫbodyﾂｻ*), sm3 | 20-2000 |
| Dosage error (allowable), % | 2 |
| Dosingspeed (max), doses/min: * | 25 |
| Welding (soldering), packingtime (includingcooling), sec. | 1-2 |
| Heating of welding unit (welding method) | Continuous |
| Length of packing (max), mm | 300 |
| Packing width (max), mm | 200 |
| Adjustable parameters | |
| Dose volume (range), sm3 | 20-2000 |
| Heating temperature of the welding unit (range), ﾂｰﾐ｡ | 80-250 |
* equipment performance depends on the type of packaged product, its flowability, density, moisture content, dose size and properties of packaging material.
To insure the functionality of pneumatic drives of this packing and filling equipment it is necessary to have compressor (is supplied separately).
