Filling and packaging machine is used for continuous process of packaging by weight dosing method of flowable, (hard-flowable) non-dust products and packaging into the polymer films.
The automatic packing machine includes pneumatic-mechanical packaging device and weight batcher. In automatic mode it performs up to 40 packs / min.
This packing machine is the most friendly for packing products of any flowability, excluding (flour, surag powder). Accounting for the dosing method and the batcher specifications, the packing machine is able to change spontaneously the portions of the packed products and, therefore, to achieve the most accurate dosing. The replacement of the packed product in this automatic machine with the weight batcher doesn’t have limitations.
The difference of this equipment is the use of pneumatic-mechanical packing automat, which has combines drives (the tension of the film is carried out with electrical drives and belts, and the clamping / unclamping of the welding elements of the soldering unit are performed with pneumatic drives). This combination increases the operation speed of the machine allows using more wide packing films. The disadvantage of this machine is noise of operation due to the usage of compressor.
Spacifications:
| Power supply | |
| Voltage supply, V | 380 |
| Supply current frequency, Hz | 50 |
| Power consumption, kW/h | 1.5 |
| Power of pneumatic drives | |
| Airpressureinline (average), atm. | 6 |
| Airconsumptionataveragepressure, l./min. | 100 |
| Overalldimensionsandweight | |
| Length (max), mm | 2000 |
| width (max), mm | 1500 |
| height (max), mm | 2800 |
| weight (max), kg | 400 |
| Sizes and thickness of packing material | |
| Thickness of packing material (allowable), microns | 20-60 |
| Width of the roll (max), mm | 380 |
| External diameter of the roll (max), mm | 300 |
| Working characteristics | |
| Volume of the hopper for raw material, l | - |
| (hopper with 1 spout) | 60 |
| (hopper with 2 spouts) | 120 |
| (hopperwith3spouts) | 180 |
| (hopperwith4spouts) | 240 |
| Dosing limits (nominal volume of the «body»*), sm3 | 20-2000 |
| Dosage error (allowable), % | 2 |
| Dosingspeed (max), doses/min: * | - |
| (batcher with 1 «stream» **) | 10 |
| (batcher 2 «streams» **) | 20 |
| (batcher with 3 «streams» **) | 30 |
| (batcher with 4 «streams» **) | 40 |
| Время сварки (пайки) упаковки, сек | 1-2 |
| Welding (soldering), packingtime, sec. | Continuous |
| Heating of welding unit (welding method) | 300 |
| Length of packing (max), mm | 190 |
| Adjustable parameters | |
| Weight of dose (range), g | 20-2000 |
| Heating temperature of the welding unit (range), °С | 80-250 |
* Packing machine performance depends on the type of packaged product, its flowability, density, moisture content, dose size and properties of packaging material.
** the “stream” means units and devices insuring forming of separate stream of the packed product from the batcher-hopper, its division by doses and issuing these doses in the certain subsequence. The “stream” consists of: the hopper spout with hopper, vibrating chute disposed below a spout, the weighing beaker in which the vibrating chute feed the product, and a controller unit controlling the operation of the vibrating chute and weighing beaker.
