Filling and packaging machine is used for continuous process of packaging by volumetric dosing method of flowable, non-dust products (rice, seeds, salt, coffee and so on.) and packaging into the polymer films.
The automatic packing machine includes pneumatic-mechanical packaging device and volumetric batcher. In automatic mode it performs up to 50 packs / min.
This model is not used for packing dusty (hard-flowable) products (flour, raisins, corn sticks). This machine has limitations on replacement of the packed products due to the volumetric batcher.
The difference of this equipment is the use of pneumatic-mechanical packing automat, which has combines drives (the tension of the film is carried out with electrical drives and belts, and the clamping / unclamping of the welding elements of the soldering unit are performed with pneumatic drives). This combination increases the operation speed of the machine allows using more wide packing films. The disadvantage of this machine is noise of operation due to the usage of compressor.
Specifications:
| Power supply | |
| Voltage supply, V | 380 |
| Supply current frequency, Hz | 50 |
| Power consumption, kW/h | 1,5 |
| Power of pneumatic drives | |
| Airpressureinline (average), atm. | 6 |
| Airconsumptionataveragepressure, l./min. | 100 |
| Overalldimensionsandweight | |
| Length (max), mm | 1100 |
| width (max), mm | 950 |
| height (max), mm | 2200 |
| weight (max), kg | 300 |
| Sizes and thickness of packing material | |
| Thickness of packing material (allowable), microns | 20-60 |
| Width of the roll (max), mm | 380 |
| External diameter of the roll (max), mm | 300 |
| Working characteristics | |
| Volume of the hopper for raw material, l | 60 |
| Dosing limits (nominal volume of the «body»*), sm3 | 50-1200 |
| Dosage error (allowable), % | 2 |
| Dosingspeed (max), doses/min: * | 50 |
| (batcher with 1 «stream» **) | 1-2 |
| (batcher 2 «streams» **) | Continuous |
| (batcher with 3 «streams» **) | 300 |
| (batcher with 4 «streams» **) | 190 |
| Adjustable parameters | |
| Dose volume (nominal volume error), +/- % | 30 |
| Heating temperature of the welding unit (range), °С | 80-250 |
* "body" is referred to the metal container, with filling the interior space of which the dosing of the product is performed.
** Packing machine performance depends on the type of packaged product, its flowability, density, moisture content, dose size and properties of packaging material.
To insure the functionality of pneumatic drives of this packing and filling equipment it is necessary to have compressor (is supplied separately).
